Aqara Roller Shade Driver E1 - 90° Rotated Wall Mount Adapter
Description
# Aqara Roller Shade Driver E1 - 90° Rotated Wall Mount Adapter ## Overview This is a **3D-printable wall mount adapter** for the **Aqara Roller Shade Driver E1**, designed to rotate the device **90 degrees**. This allows the roller shade to extend beyond the window frame while still maintaining full functionality. ## Why Use This? The default mounting orientation of the Aqara Roller Shade Driver E1 may not work for setups where the roller shade extends beyond the window frame. This adapter solves that by: - Rotating the mount **90°** to allow proper alignment with extended roller shades. - Keeping the roller chain tension correct while maintaining smooth operation. - Allowing for a cleaner and more flexible installation. ## Features - **90° rotated mount** for better roller chain alignment. - **Sturdy and secure design** that ensures the Aqara Roller Shade Driver E1 stays in place. - **Easy to print** with standard FDM 3D printers. - **No support needed** for most printer setups. ## Print Settings - **Material:** PLA, PETG, or ABS - **Layer Height:** 0.2 mm (recommended) - **Infill:** 13% or more for strength - **Walls:** At least 2 - **Supports:** Not required (designed for easy printing) ## Installation 1. Print the part using the recommended settings. 2. Mount the adapter to the wall using the included adhesive. 3. Screw the Aqara Roller Shade Driver E1 to the adapter. 4. Slide the Shade driver onto the bracket ## Notes - Ensure proper alignment before securing the mount. - If necessary, adjust chain tension after installation.
Statistics
Likes
0
Downloads
0