Modular Tire Rack (iRack) for SCX24 Wheels/Tires
Description
Here, an SCX24 tire rack (__iRack__) that can be as long or as short as you need. Got a new set of tires? Just print another section. - You __may__ need supports, the holes that the cross bars slot into have an inner lip so that all cross bars fit the exact same distance into the end stands. Some printers can get away with printing small overhangs, others have trouble. - Cross beams are at 45 Degree angle to improve structural integrity and prevent warping of the rack bars. - Modular, you can just print (4) CrossBars and (1) ModularEndStand to add on to the iRack - Bottom rack __fits up to 70mm tires!__ - Can use for wheels alone, but the wheel/center ring has to be at least __28/29mm__ or it will fall through. - Tolerances are tight, you need to keep in mind the capabilities of your printer. If the cross bar ends don't fit, shave them down a smidge.
Statistics
Likes
0
Downloads
0