Blok - Code Lyoko
Description
Description: I had a nostalgia moment which made me model this one day. Took some time and its not perfect, but I'm very pleased with the result. I recommend cutting the object in half to print the cube portion separately and be able to flip the legs. I included the cut version as well, but if you're able to do so in your slicer, I would suggest doing it yourself so you can add a connector. I personally drilled a hole in the cube's bottom to place a magnet so the top can be rotated. In hindsight I think it looks better slightly turned. I do suggest larger prints as the legs are where I ran into issues. I won't be able to update this if there are issues as I modeled this in Revit and no longer have a license (Good excuse to learn Blendr hah). The full model sits at about 4.6 Inches. This was originally printed on an Ender v2. Print Settings: Filament: PLA Layer height: 0.2mm Infill: 10-15% (My go to usually) Sparse infill pattern: Gyroid Supports: Yes Brim: Depends
Statistics
Likes
0
Downloads
0