Globber Go-Up Scooter Booster Seat
Description
Two versions of booster seats for the Globber Go-Up scooter, for raising the seat by approximately 5 cm or 10 cm. Should be printed upright for maximum stability. Additional material for the project: - For stability reasons, an iron pipe with two drilled holes is needed. Pipe outer diameter: 30 mm. First hole shall be drilled according to the booster seat adapter hole and the distance between the two holes shall be 48 mm (note: pipes for the two booster seat versions are different) - 3 pcs. M8 x 45mm bolts and nuts
Statistics
Likes
0
Downloads
0