Elektro Robot. Battery operated, walking, swinging arms, Lit Eyes and moving gears in the chest opening.
Description
The head STL files can be found at these Thing-i-verse links. AI generated head. https://www.thingiverse.com/thing:6949731 CAD generated Head. https://www.thingiverse.com/thing:6950348 YouTube videos on the project and the build. Here is a link to the AI generated head for Elektro. https://www.thingiverse.com/thing:6949731 Here is a link to the CAD generated head for Elektro. https://www.thingiverse.com/thing:6950348 Here is a link to step 1 of the Elektro robot build, the mechanical legs. https://youtu.be/sxerHdQQ84A Link to part 2 of the Elektro robot build. https://youtu.be/mSAioIW3XTE Link to part 3 of the Elektro robot build. https://youtu.be/K_OXG_Xfg9Q Link to build part 4. https://youtu.be/AsoRyc3upNQ Here is a link to the discussion of the Elektro robot project. https://youtu.be/9puUa_VaR0I?si=Ze-W2kd3lET2I5kJ The Foot / leg file will show as non-manifold in the slicer, but has been tested in Cura, Prusa slicer and BamBu lab slicer. I used a 1:220 TT gearmotor. You can find them on Aliexpress. I used a two cell AAA battery holder. A slide switch with 19mm mount holes. Cut 4 brass rods, 3mm die by 45mm long for the leg units. I placed two, 1 OZ wheel weights in each foot/leg part. 3mm LEDs can be used for the Eye lights. I used white LEDs so added a 5-volt boost regulator and current limit resister. 8 Suitable rubber O rings for the ratchet wheels. Use suitable small nails as axle pins for the ratchet and wheel parts. I held the body onto the motor fram with two 2mm taping screws. You will need Five 6-32 screws that are 1/4 inch long. You will need One 6-32 screw that is 5/8 inches long. You will need Two 6-32 screws that are 1 inch long.
Statistics
Likes
0
Downloads
0