Manta E3EZ box for side mount 2020 remix
Description
Wanted to make the box larger and add 4th screw post, yes I added two other posts those are just for support as you push and pull things into the pins, I don't like flexing boards! I printed the bottom and am working on the top now. The board sits a bit far away from edges and the USB on the CM/CB side is a bit tight with the post. I might tweak all that in the near future, but for the most part the LAN and USB are useable (even if you have to snip the tower between them for larger USB cable!) Not sure if it was like this in original, as I didn't print it! There was no access port for HDMI, I will add that as well, in case someone needs to install a display. Also there was no access port for STM usb, I will add that as well. These are really probably not needed, I am also going to add a version with no access ports and leave the board sit right where it is at. I have also uploaded a copy of the MANA E3EZ Stl file in case anyone else needs it.
Statistics
Likes
0
Downloads
0