Ecovacs Airbot Z1 Camera Cover
Description
The Airbot Z1 comes with an integrated camera cover which is controlled with an actuator and can't be operated manually by the user. Also, often it is really hard to tell if the cover is open or closed. Sometimes you just don't want a robot controlled camera driving around your flat. This shutter enables you to easily cover up the camera at any time manually. It mounts in the front-most vent slits (Just hangs in those). When open the camera is not obstructed at all, when closed the camera is fully blind. The slim profile ensures the robot does not bump into any objects with the camera cover when driving around. The 3 part design allows you to print with minimal supports. Top part printed upside-down and bottom part printed the right way up don't need any supports, the door when printed the right was up only needs minimal supports under the door handle. To assemble I suggest the tiniest amount of glue on the upper and lower part. Make sure the door is installed before assembly and to not get any glue on any part of the door.
Statistics
Likes
0
Downloads
0