Derpi-mount
Description
Yeah, This Is A Hotend Mount For My Ultimaker And Two E3D-Hotends. I Havent Tried It Yet And Maybe Never Will. This Is Just A Bit Of Derping Around With The Hull-Feature In Openscad. Don'T Print This Just Yet. The Fittings On The E3D-Heatsink Head Do Not Fit. Also There Are Other Things That Need To Be Adjusted. I Thought It Would Be Cool For The Hotends To Use The Same Fan, So You'Ll Have Less Wiring And A Bit Less Weight On Your Head. Also The Hotends Are Mounted As High As Possible To Have Their Mass-Center As Close To The Crossing Of The Rods As Possible. What'S Missing Is Clamp For The E3D-Heats. Maybe I Can Use My Bowden Adapter ( Http://Www.Thingiverse.Com/Thing:163856 ), We'Ll See. Also There Has To Be Some Kind Of Fanmount, But I Have No Idea If There Is A Fan-Mount Modeled In Openscad (I Don'T Think So). Hmmm..... Update: Jep, Used A Design Like The One Said Above. Also Used A Mounting System That Should Work With Daids Fan Shroud (Found On Youmagine).... Update: Tested. Results Were Promising At Least What Concerns The Mechanical Properties. Tolerances Have To Be At 0.5Mm At Least On My Printer. Cooling Didn'T Work... So Don'T Use This Design.
Statistics
Likes
4
Downloads
0