HuaSheng 142F Air Intake
Description
<B>Air Intake Manifold For Huasheng Hs-142F 4-Cycle 49Cc Gas Engine</B>. 3D Printed Parts Consist Of Manifoldcollar3 To Fit 3/4" Pvc 90-Degree Elbow To Which A Cone-Type Air Filter Can Be Attached. Requires: Manifoldflange2 (Also Available Here) As A Spacer Which Mounts At Carburetor Venturi. The Elbow With The Flange & Collar Can Then Slip Over Loosened Carburetor Bolts. This Allows The Air Manifold Tube With Attached Flange To Be Removed And Installed Without Having To Take Out The Carb Bolts, Gaskets And Associated Parts. Prototype Parts Were Used As-Printed Without Any Post-Printing Operations. May Also Fit Honda Gsh-50-Q. Usefulness Of This Part Depends On The Application. The Flange & Collar Assembly Is Attached To The Pvc Elbow With "J. B. Weld" Or Similar Epoxy Glue. <B><Font Color=Red>Provided As-Is. User Assumes Any And All Risks.</Font></B> <B>Physical Properties:</B> Manifoldcollar3.Stl Length: 60.06 Mm Width:34.01 Mm Height:8.89 Mm Volume:3,804.45 Mm3 Surface Area:4,191.32 Mm2 Print Time Est: 20Min Prototype Tested: Hips Manifoldflange2.Stl: Length: 2.36 In -- Width:1.34 In -- Height:0.11 In -- Volume:0.18 In3 -- Surface Area:4.48 In2 Print Time Est: 12Min. Prototype Printed By Cubify Using Black Everlast For About $6.00.
Statistics
Likes
3
Downloads
0