Openbuilds v-slot z axis for Lulzbot Taz 4/5 Printers
Description
This Modification Adds Openrail Extrusions In Place Of The Existing Lulzbot Taz 4 Or 5 Smooth Z Rod. I Will Post A Parts List Soon. It Basically Just Needs 8 Of The Mini Wheels, With 4 Mini Wheel Eccentrics And 4 6Mm Spacers. Extrusions Are 20Mm X 20Mm Openrail 500Mm Extrusions, Stock. You Will Also Need Some T Slot Nuts (M5, I Recommend The Dropin Ones For This) 4 Spacers And Longer M5 Bolts To Move The Control Box Out Fromt He Frame To Clear The Wheels, And Several Longer M3 Bolts. This Project Also Has An Option To Replace The Existing Stock Heat Set Insert Based Z Endstop With A Full On Micrometer Body, Which I Highly Recommend. Edit: Uploaded A New Version Of The Bearing Carriage. This Version Has Sufficient Clearance To Work With My New Anti Wobble Nut Project. If You Dio Not Intend To Fit That Project, The Older Version Is Fine. The Anti Wobble Z Nut Mount Project May Be Found Here: Http://Www.Thingiverse.Com/Thing:1089626 Edit 2: Wobble Clearance Block With Passthrough Slot For The Z Endstop Cable Now Uploaded. Edit 3: Cabel Routing Top Cover Option Now Uploaded. The Sum Difference Of That Part And Prior Versions Is The Cable Chase Segment On The Side For Routing Front To Back. This Is Mainly Useful For Adding Lightbars Or Sensors On Top Of The Gantry.
Statistics
Likes
67
Downloads
0