Safety Whistle
Description
Inspired By The "Storm Whistle" I Found By Searching For Whistles Online, I Created This Thing. **Print The Pea First** *You Must Drop The Printed Pea Into The Whistle'S Circular Chamber While It'S Printing.* Wait Until The Whistle Has Printed At *Least* 10Mm High (The Base Thickness Is 2Mm, And The Pea Is 8Mm Diameter). I Printed The Pea Using "Spiral Vase" Mode. If You Do Not Have That Option With Your Slicer/Printer, Print With One Shell, 0% Infill (No Infill). That Will Give You A Nice, Light, Hollow Pea For The Whistle Chamber. Believe It Or Not, It Will (And Needs To) Print Without Support (The Inside Of The Whistle Needs To Be Hollow With No Obstructions). **This Will Test Your Printer'S Bridging Capabilities.** The Bridging And Next Two Layers May Be A Bit Messy, But You Should Get A Nice Top Surface.
Statistics
Likes
17
Downloads
0