Printrbot Simple Metal Side Saddle Tool Holder
Description
The Ultimate Tool Holder For Your Printrbot Simple Metal! No Drilling Or Adhesive. Two Clips On The Bottom And Three Holes On The Top Surrounding Screws Holds Everything In Place. You Will Need A Set Of Legs Or Base To Make Full Use Of All The Slots. I Printed These Http://Www.Thingiverse.Com/Thing:403555 Holds: Needle Nose Pliers 3In Scraper Two 17Mm Wrenches For Probe (File Provided) 1Mm Spacer For Probe Three Mini Screw Drivers Or Picks Three Allen Wrenches (1.5Mm 2.5Mm 3Mm) 7/16 Wrench Combo Wrench Micrometer Sd Card 4 Hot End Tips Small Parts Tray Brush(Wire Or Nylon) Print Part 1 First And Test Fit In On Your Printer. I Can'T Say For Sure All Simple Metals Were Made Identical. Print Part 2 With A Raft And Support. Carfully Press The Two Pieces Together( The Top Of Part 1 Is Up). I Used A Wood Working Clamp To Equally And Slowly Press The Tabs In Place. The Pics Are Of The Beta Version. Some Subtle Changes Were Made To The Final.
Statistics
Likes
14
Downloads
0