i3 X-Ends for LM8LUU and 8mm Anti-Backlash Nut
Description
I Got A Pair Of Tr8*4 Leadscrews From Robotdigg, As Well As The Anti-Backlash Nut That Require Substantial Changes To The X-Ends On My Prusa I3.. So I'M Designing My Own. Linear Stepper Nema17 W/ 300Mm Tr8*4 Leadscrew Http://Www.Robotdigg.Com/Product/557 Anti-Backlash Nut For Tr8*4 Lead Screw Http://Www.Robotdigg.Com/Product/344 I Designed The X-Ends To Hold A Captive Lm8Luu Bearing (8X15X45Mm), Retained By M3 Screws At The Top And Bottom. Since The Diameter Of The Anti-Backlash Nut Is Rather Large, This Required That I Space Out The Distance Between The Smooth Rod And The Threaded Rod To 26 Mm (Vs 20). I Will Also Be Designing Altered Motor Mounts For The Z Axis To Take This Into Consideration. *Work In Progress* Update 1: Printed Out X Motor End, It Fits The Bearing And 8Mm Nut Well - But I Had To Revise The Motor Part To Be A Bit Thicker. Also Made The Belt Pathway Wider, To 10Mm, So It Can Handle A 9Mm-Wide Belt.
Statistics
Likes
21
Downloads
0