Plotter03
Description
Youtube Playlist About The Project: Https://Www.Youtube.Com/Playlist?List=Plsj1Rii3N77Nlqvqbtt2Dgazwyofm86Jg Made From Laser Cut 3Mm Acrylic And A 3Mm Cnc Mill. You Will Need Additional Components 3 & 4Mm Bolts And Knots 2 X 25Mm (Outer Ø) Bearings 1 X ~12Mm (Outer Ø) Bearing 1 X Timing Belt (~5000Mm) 3 X Pulley (Should Fit The Timing Belt) 3 X Nema17 Stepper Motors 1 X Arduino Uno 1 X Cnc-Shield 3 X Drv8825 Stepper Motor Drivers 1 X Aluminium 14Mm Tubing (~2500Mm) 4 X 3D Printed 'Linear Bearings' 1 X 9G Servo Load This Special Version Of Grbl Down On The Arduino Uno - Https://Github.Com/Robottini/Grbl-Servo This Enables You To Use A Servo For The Penlift. The Servo Can Be Lifted By Sending "M03 S50" To The Machine And "M05" For Resetting. Software For Streaming Gcode: Https://Github.Com/Winder/Universal-G-Code-Sender Software. The Attached Grasshopper Script (.Gh File) Can Be Used To Generate And Send G-Code To The Machine. Http://Www.Grasshopper3D.Com (Input 2D Geometry On Xy Plane In Mm) For Less Information Visit Www.Ydefeldt.Com
Statistics
Likes
178
Downloads
0