Bulldog Lite Extruder, eBay E3D clone heatsink and Heatbed fan mount
Description
Frustrated With My Bulldog Lite Extruder I Decided To Expand On The Heatsink Fan Mount I Designed. The Extruder Mount Comes In Two Flavours. Either 2 Hole Mounted, Onto The Ooznest Carriage, Or Onto The Stock Rework Carriage With 4 Holes. Included Is A Stl For A Fan Mount For An Ebay E3D Style Heatsink. This Is Practically Identical To The Heatsink Fan Mount I'Ve Published As A Standalone. This One Has Just Been Shaved A Mm Shorter, So The Fan Is Closer To The Heatsink. This Means If You Use A 6Mm Or 7Mm Deep 30Mm Cooling Fan, Then The Entire Heatsink Cooler Will Rotate And Fit Neatly Under The Extruder Mount. Also Included Is A Heatbed Fan Mount That Duplicates Spacing Of The Stock Extruder Mount, Ie The One That Comes With It. This Means Any Heatbed Cooling Solution You Are Currently Using Should Simply Just Bolt On Without Fiddlying Around. Please Note. The Ebay E3D Style Heatsink Clone Is Different To A Proper E3D Heatsink. You Can Look At My Photo And Just Count The Number Of Fins. Whats Next? An Add-On For A Inductive Sensor Pickup
Statistics
Likes
4
Downloads
0