intensewalkera Vibration dampening isolator mould - cast - template cylindrical form
Description
Revised To V1.3- Drip Tray Added To Help Prevent Leakage. Bolting Arrangement Amended Revised To V1.2 Radius Corners To Help With Sticking To Build Bed, Two End Recesses Added To Allow For A Screw Driver To Be Used To Prise The Templates Apart. Http://Youtu.Be/Oak46Bk0Zey This Is Based On The Vibration Dampening Balls I Already Use , Used On Multicopters To Isolate Vibrations To The Gopro Camera Range (Will Work With Others). Its A Rough Design, I Will Comeback And Tidy Up The Design Of This, Once I Get Chance.I Would Like To Have It Hinged And A Few Other Minor Tweaks To Make Pouring The Silicone In To The Mould Easier This Is A Version V1.3 The Photos Are The Results Of My V1 Attempt, Which Came Out Well For A First Attempt At Moulding, But I Modified The Files A Little, Based On My First Experiences. Bolt The Two Parts Together With M3 Bolts, Don`T Over Tighten. Mix Up Your Silicone And Catalyst And Pour. I Used 50G Of Rtv 2020 Silcone/Catalyst As A Guide Of Quantity Checkout How To Make The Rtv Silicone Mix On Google Etc, There Is Plenty Of Info On There, You Can See From My Attempt, That I Had Too Much Air Get In, This Was Totally My Fault Due To It Being My First Time Using This Silicone Mixing. I Know My Next Attempt Will Be Far Better, Now I Know What I Am Doing. I Used Medium Hardness Silicone As A Guess, I Have Not Tested It In Anger Yet But I Will Get Round To It Shortly.
Statistics
Likes
103
Downloads
0