Loose Filament Spool Enhancement (based on the Spool Wall Mount)

Description

Update: A New Version Of The Enhancement Plate (Version With 'New' In The Name): With Grooves To Keep The Rubber Band Better In Place (But Is Harder To Print As Of The Needed Bridging). Both Enhancement Plates Are Interchangeable And Proper Fit To The Cones Of My Spool Wall Mount. Better Clickable And Removable With The Updated Cone Form The Spool Wall Mount. If You Want A Stronger Fit Turn It Little As A Bayonet Catch. New A Spacer Part To Have The Proper Distance Between The Cones. This Is An Enhancement To My Spool Wall Mount (Http://Www.Thingiverse.Com/Thing:1051124) To Handle Loose Filament. Simple Click-Fix It On One Of The Cones And You Don'T Need To Remove It For Usual Spools. The Mechanism And Design Is Heavily Inspired By This Thing: Http://Www.Thingiverse.Com/Thing:13395 Thank You Murat! You Have To Print The Enhancement Plate And Three Of The Forks. I Uploaded The Fork As Single Piece And Grouped As Two Or Three Of Them, Depends Our You Building Space. Additionally Needed Are Three M4X16 Countersunk Screws (5/32" Or Us No.8, 5/8" Length) And A Rubber Band. Be Carefully By Pressing The Enhancement Plate To The Existing Cone (-> Instructions). See The Handling On The Pictures. You Have To Mount Something Between The Cones To Have Enough Horizontal Space (Can Be The Spacer Part As Attached To This Thing Or An Empty Toilet Paper Roll If Nothing Else Available ;-) ). After Entering The Loose Filament You Pivoting The Three Forks 90 Degrees To Fix It. Enjoy Your Upgraded Spool Wall Mount!

Statistics

Category

Tags