Z Axis Restraint for Pangu i3
Description
Restraining The Z Axis Threaded Rods At The Ends Can Help Reduce Forces Caused By Wobble In The Threaded Rods Being Communicated Down The X Axis To The Print Head. When Taken In Addition To Other Measures Such As [Thing 1077863](Https://Www.Thingiverse.Com/Thing:1077863) Z Axis Wobble Can Be Virtually Eliminated. Inspired By [Thing 9864](Https://Www.Thingiverse.Com/Thing:9864) This Is A Z Axis Constraint For The Pangu I3 Variant Of The Prusa I3 Marketed By Rp3D.Com. Pangu I3 Has The Z Axis Smooth Rods Sitting Flush With The Laser Cut Frame And A Cap Over The Top Fixed By M3 Bolts. This Z Restraint Replaces The Cap And Grips The 6Mm Threaded Rod Above The Laser Cut Frame Using A 626 Bearing. Some Shrink Wrap Over The Top Of The Threaded Rod Will Help It Fit The Bearing More Snugly. A Scad File Is Provided, So It Could Be Adapted To Fit Other Printers.
Statistics
Likes
6
Downloads
0