SMC MHC2-20 Gripper Mount & Fingers (End Effector) for Epson C3 Robot

Description

The Bracket Is Used To Mount An Air-Powered Gripper To The End Of An Industrial Robot Arm. Mounting Base Has Three 4Mm Holes For Securing To The [Epson C3 Robot](Http://Robots.Epson.Com/Product-Detail/10) And The Sides Have 5Mm Holes For Securing The Gripper Made By [Smc, Model Mhc2-20](Http://Www.Alliedelec.Com/Smc-Corporation-Mhc2-20S/70344489/). The Fingers (You'Ll Need Two) Will Close To Form A Parallel Pinch. You'Ll Probably Want To Tweak It Depending On Your Target. To Ensure A Properly Sized Hole, They Are Printed Undersized And Need To Be Drilled Out. I Use This [Metric Drill Bit Set From Amazon](Http://Www.Amazon.Com/Gp/Product/B00Afxj616).

Statistics

Category

Tags