Toolbox for miniature tools
Description
Version Ii - -Significant Changes Made To All Tool Catches, Tools Fit Much Better. -Opening Edge Slightly Modified (-0.010"), Case Closes Better. -No Future Versions Expected Story - Annoyed With Misplacing My Tools At The Office I Decided To Make This Toolbox For Myself And The Technicians. It Is A Box For The Most Used,Lost And Borrowed Tools At My Office. Please Download And Enjoy. If You Want To Make One For Your Office And Need A Hand Please Contact Me. Tools - All The Tools Can Be Purchased At Mcmaster Carr (Www.Mcmaster.Com), Here Are The Order Numbers. Screw Driver Kit: 52985A22 Hex Driver, 0.05": 5497A22 Hex Driver, 1/16": 5497A23 Hex Driver, 5/64": 5497A24 Hex Driver, 3/32": 5497A25 Hex Driver, 7/64": 5497A26 Tweezers: 5669A13 Brush: 7431T92 Or Knife: 35545A71 Vial: 5274T69 Magnets - The Holes Fit 3/16" X 1/2" Magnets. Unfortunately Mcmaster Does Not Carry That Size, I Purchased 5852K12, A 5" Long Magnet, And Broke And Sanded It To Make The Size Needed. Hinge - The Pin For The Hinge Is A Length Of 1.75Mm Abs Filament, Cut To Length. Add A Drop Of Crazy Glue At One End To Hold It In Place. Other Notes - The Brush Can Be Replaced With A Small Utility Knife, But Both Can'T Be Stored At The Same Time. There Are Also Spots For Seven 1/4" Screw Bits. As Well As Three Small Taps, 2-56, 4-40 And 6-32 Shown. Please Keep In Mind That Printing Each Side Takes About 7.5 Hours. Size - Closed The Box Is About: Wide: 5.5" (Including Hinge) High: 7.0" Depth: 1.5"
Statistics
Likes
93
Downloads
0