FPV Goggles Anti-Fog Fan System
Description
This Is A *Home-Made Version* Antifog Fan System For Your Fpv Goggles; A Must In The Cold Days!! This Design Has Been Tested On A Fatshark Base Sd And Skyzone Goggles, But It Could Work In Other Models; And Remember That You Can Cut And Adapt The Eye Holes For Your Goggles. The Design It Is Based On *Three 3D Printed Parts*, The *Foam* Around The Goggles And The Small *Fan*. Attached You Have The Three Stl Files For Printing, And A Pdf With The Foam Templates. There Are Two Versions Of The Called Fanairguide, Giving You An Extra For Those Big Noses ;). The Small Fan Selected Is A 12V Dc 25X25X10Mm That Could Be Easily Found Online. It Has Been Tested From 6V Up To 13V, Good To Be Used With A 2-3S Lipo Updates: -If You Have Problem With Your Fpv Goggle Buttons And The Fan Holder ( Like In The Fatshark Predator), Check Out Steve'S Fan Adaptor For This Goggles Http://Www.Thingiverse.Com/Thing:1163521 Enjoy The Design And Share It !!
Statistics
Likes
417
Downloads
0