Kossel XL End stop mount for adjustable carriage
Description
I Made This After Printing Adjustable Carriages That Have The Adjusting Screw In The Centre And End Stop Switches That Are Offset From Centre. This Should Allow The Switch To Sit Centre Of The Mount And Extrusion And Make Contact With The Adjuster Screw Once Again. This Mount Will Offset The Switch By 3Mm To The Right And Is For A Switch With Holes 9.5Mm Apart Centre To Centre. The Mount Also Offsets The Switch Away From The Rail By 14Mm As The Switch Will Now Have To Contact The Carriage Rather Than The Roller Mount. (Due To This You Will Have To Use Button Head Screws To Minimise The Rub On The Belts Until I Find A Solution) As My Printer Is Down At The Minute Until I Get These Printed I Am Unable To Test Them And Adjust. I Will, However, Be Happy To Make Adjustments As People See Fit.
Statistics
Likes
9
Downloads
0