Sunhokey 2015 x-axis stabilizer
Description
My Axis Plate Sagged Due To The Weight Of My Additional Installed Hardware (Fan, Inductive Sensor). With This Part It Gets Stabilized And I Has A Fine 90° Angle Agein. I Had To Replace The M3X16 With M3X18 Screws. I Use Wide (58Mm - See Photo) Linear Bearings For The X-Axis. The Holes Are All 3Mm. I Drilled The Horizontal Holes To 4Mm To Fit The Screws.
Statistics
Likes
10
Downloads
0