QUBD Twoup or Oneup Sturdy E3D V6 Hotend mount
Description
I Created A Front Facing Rectangular Mount To Sandwich The Hotend Onto The Original. I Also Created 4 Holes For 4 M3 25Mm Screws. They Are Fastened With M3 Nuts, However The Holes Should Be Sized Correctly To Provide A Very Tight Fit For The Screws. I Also Added A Space On Top To Fit A Tight That Screws Onto The Bowden Ptfe Tube That Goes All The Way Down Into The Hotend As The Black Locking Fastener Creates Too Much Of A Wiggle With Filament Retracts, So The Zip Ties May Look Ugly, But They Work Incredibly Well And There'S No Movement In The Line. The Whole Thing Is A Very Snug Fit And Solid As A Rock Once Mounted To Lonuf'S X-Gantry Slider.
Statistics
Likes
29
Downloads
0