SeeMeCNC EZStruder Upgrade V3 - New Rev Uploaded!
Description
This Is My Own Redesign Of Seemecnc'S Ez Struder. I Designed It To Have A Tighter Filament Path Near The Drive Rollers, Have An Inlet Guide, And To Combine The Three Molded Parts Of The Original Into A 2 Layer Assembly. The Design Originated From The Manufacturer'S Original Stl Files At Github.Com/Seemecnc A Second Set Of Files Has Been Uploaded That Is Compatible With The E3D Bowden Style Adapters. Http://E3D-Online.Com/E3D-V6/Spares/Bowden-Adaptor-1.75Mm-Filament It'S Essentially The Same Thing Minus About 1Mm To Fit The Dimensions Of That Groove Mount Snugly. V2 Base Plates Uploaded. A Few People Reported That The Spring Perch Was Breaking Off Of Their Prints, So I Added A Gusset To Both Versions Of The Part. (Photo Above) V3 Files Uploaded. This Revision Adds A Touch More Rotation To The Tension Lever For Squishing Flexible Filaments. I'M Happy To Report That I Have Successfully Printed Full Blown Ninjaflex With This Revision Of The Extruder Body!
Statistics
Likes
70
Downloads
0