Y axis Bed Cable Chain for Lulzbot Taz Printers
Description
This Is A Set Of End Mount Blocks For An Igus 10 X 15Mm Cable Chain With End Mounts. These Will Fit A Stock Taz 1-5 With No Modification.You Will Need 6 M3 Heat Set Inserts ( Http://Www.Mcmaster.Com/#Catalog/119/3267/=Zw8U0V) , 6 M3 Bolts, One M5 Bolt And T-Slot Nut (Drop In Nuts Work Well Here) And A Zip Tie. I Specifically Used These Cable Chains: Http://Www.Ebay.Com/Itm/261848758125?_Trksid=P2060353.M2749.L2649&Sspagename=Strk%3Amebidx%3Ait Edit 1: Shorter Variant Of The Bed Attachment Point Files Uploaded. This Version Will Clear Left Side Mounted Fan Ducts When Printing At The Extreme Upper Left Of The Bed Properly.
Statistics
Likes
30
Downloads
0