intensewalkera GoPro Loveseat Vibration isolation mould - cast -template v2.2
Description
Revised To 2.2 - Tab Hole Positions Moved To Allow Better Bolt Access Revised To V2.1 A Few Minor Tweaks , Added A Ribbed Back, Tapered A Few Edges To Allow The Silicone To Pour In Better. This Is Based On The Team Blacksheep Loveseat , Used On Multicopters To Isolate Vibrations To The Gopro Camera Range (Will Work With Others). Its A Rough Design, I Will Comeback And Tidy Up The Design Of This, Once I Get Chance.I Would Like To Have It Hinged And Free From None 3D Printed Parts. I.E Lose The Bolting Up Arrangement. Http://Youtu.Be/Oak46Bk0Zey Bolt The Two Parts Together With M3 Bolts, Don`T Over Tighten. Mix Up Your Silicone And Catalyst And Pour. I Used 100G Of Rtv 2020 Silcone/Catalyst Checkout How To Make The Rtv Silicone Mix On Google Etc, There Is Plenty Of Info On There, You Can See From My Attempt, That I Had Too Much Air Get In, This Was Totally My Fault Due To It Being My First Time Using This Silicone Mixing. I Know My Next Attempt Will Be Far Better, Now I Know What I Am Doing! I Used Medium Hardness Silicone As A Guess, I Have Not Tested It In Anger Yet But I Will Get Round To It Shortly.
Statistics
Likes
6
Downloads
0