Sunhokey prusa i3 Print with ABS heated ordinary Sodalime glass and strongest hair spray.
Description
###Printed A Lcd Case For My Sunhokey Prusa I3 With Abs. Http://Www.Thingiverse.Com/Thing:28767 The Results Were Very Good. Printed On The Ordinary Sodalime Glass With Bed Temp Of 100C And Extruder At 235C. I Used The Strongest Hair Spray Available At The Time. 10Mm Brim Was Added. The Print Came Out With Zero Curling And Peeling Of Edges.
Statistics
Likes
4
Downloads
0