Prusa i3 Y Motor Bracket Adapter
Description
This Is Y Motor Bracket Adapter For Prusa I3 I'M Building. The Adapter Is With 10.5 Mm Holes For The Front/Back Rods, So To Slide In Easy. I Used 4 X 10 Mm Washers And Nuts To Hold It Firmly In Place. Mount The Metal Bracket To The Adapter Before The Motor. I Used Soldering Iron On The 3 Mm Nuts To Push Them Into The Plastic Not To Block The Rods. As A Side Effect Of That Is They A Sealed Good Into The Plastic.
Statistics
Likes
3
Downloads
0