FireFlo v3
Description
This Is A Update Of The "Fireflo V2" And A Remix Of The "Dragonfli" Frame (Yes... With "I"!) And An Alternative Frame For The Blade Nanoqx (Also Fpv). ##### Some Stuff To Watch: * Here Is A Little Video Of The Very First Flight: Https://Youtu.Be/A4Syjwpvkde ##### Some General Details: * It Consists Of A Topplate And A Lowerdeck Connected With Shock Absorbers To Undock The Flight Control + Cam And Reduce Motor Vibrations. * It Has Higher Stiffness Then The V2 * There Are Different Options And Predefined Strapholders To Attach The Lipo (On The Topdeck Or Under The Lowerdeck) * Antenna Protection Predrills * More Free Space To Add Your Own Vtx And Cam And Enough Space To Place Different Flight Controls (From Nanoqx Original Board To Scisky). * And Because It Consists Of Two Parts, You Can Now Mix Colors *Yeyyyy!!* :D ##### Some More Detailed Details: * It Fits The Original Nqx Cam Or The Additional Spektrum Micro Cam Or Selfmade Cams. * Its Available For 7Mm And 8.5Mm Motors. * You Can Bend The Camera Holder Up To 20° If You Heat It Up A Bit, But Be Careful. * Frame Size Is At ~110 Mm Diagonal (M2M) And About 9 X 9 Cm In Length And Width. * Frame Weighs ~7.3G (Depending On The Material Used). * You Will Need 3X Shock Absorbers Which Can Be Found Here: Http://R.Ebay.Com/Wfjzam ------------------------------------------------------------------------------ #### Example Setups That Will Fit And Are Tested: ##### Shock Absorbers: * 50G Camera Gimbal Damper Rubber Anti-Vibration Shock Absorber (Http://R.Ebay.Com/Wfjzam) ##### Motormounts: * Motor Holders For This Frame Can Be Found In The "Coptercustoms"-Group. (Http://Www.Thingiverse.Com/Thing:1133331) ##### Antenna Protection: * Just Use Two Cable Ties And Put Them In The Provided Holes In The Lower Deck (See Screenshots) ##### Motors 7Mm: * Micro-Motor-Warehouse.Com: Cl-0720-12, Cl-0720-14 * Standard Hubsan X4 H107L ##### Motors 8.5Mm: * Micro-Motor-Warehouse.Com: Cl-0820-15, Cl-0820-17 Dark Edition * Standard Hubsan X4 H107D, H107C ##### Flight Control: ###### (For A Proper Fit, You Should Remove The Motor Plugs And Solder The Motors Directly To The Board): * Nanoqx Board (Mosfets Need To Be Replaced When Using 8.5Mm Motors) * Nanoqx Fpv Board * Micromwc (Mosfets Need To Be Replaced When Using 8.5Mm Motors) * Scisky ##### Cam And Vtx: * Nanoqx Fpv Cam * Spektrum Ultra Micro Fpv Cam Spmva1100 * Selfmade Like This: Http://Flitetest.Com/Articles/Diy-Micro-5-8Ghz-Fpv (But If You Get This To Fit, Its More Like A Bumblebee Then A Firefly ;) ) Get The "Bumblebee Backpack" Here: Http://Www.Thingiverse.Com/Thing:1134205 ##### Rotors: * Standard Hubsan X4 * Standard Revell Atomium ##### Energy: * I Recommend These For A Flight Duration Of About 5-7Min Depending On Your Style And Motors: 1S 3,7V 500Mah (Http://R.Ebay.Com/A1V5I0) * Velcro To Strap It (10Mm) ------------------------------------------------------------------------------ If You Have Questions, Don'T Be Shy. :)
Statistics
Likes
474
Downloads
0