ZMR 250 Foot 1
Description
This Foot Is Not Crash Tested Yet, But In Theory It Should Hold Up While Protecting The Cf Arm And Motor. Since It Hooks Onto The Arm, Goes Over The Motor-Mount Screws, And Attaches With One Screw, You Can Change Them Out Quickly Without Disturbing The Motor Mounting. Finishing The Part -- This Foot Goes On With One Screw Through The Arm Hole. I Did It With The Screw Head On Top Of The Arm. I Used A 4-40, Which Means I Had To Drill Out The Cf Just A Bit, And Tap The Plastic. If You Don'T Have A Screw Tap, Just Drill Out The Plastic To About 0.1" And A 4-40 Will Self-Tap In. If You'Ve Got Metric I'M Sure It'Ll Work, But You'Re On Your Own For Which Screws/Taps To Use.
Statistics
Likes
19
Downloads
0