Servo Switch Plate Mount
Description
This Is A Simple Servo Mount That You Can Attach To A Standard Switch Plate. Connect The Servo To A Microcontroller For A Quick Home Automation Project. ///////What You Need: -Micro Sized Servo (I Used Cheap Sg90 9G Micro Servos From Ebay) -Mounting Hardware For Servo And Arm (Typically Comes With The Servo When You Buy It) -Arduino //////Example Arduino Code: -You Will Need To Have The Servo.H Library Installed -Connect Servo To Pin 9, Gnd, And 5V -Turns The Switch On Right After You Connect To Power -Turns The Switch Off After 5S, On After 10S, Off After 15S, On After 20S, Then Loops. -You Can Change Or Add Time Intervals As Needed ////////Positioning* -Servo Neutral Position Is 60 Degrees -Switch On Position Is At 100 Degrees, And Off Position Is At 20 Degrees -May Need To Change These Numbers Depending On You Servo. *When Programming The Servo, The Arm Should Move About +-40 Degrees From The Neutral Position To Turn The Switch On And Off. Experiment With These Numbers For Best Results.
Statistics
Likes
1572
Downloads
0