Box with divided compartments
Description
This Is A Box That I Designed As I Wanted Something That Gave Had A Lot Of Individual Compartments In It Of Varying Sizes. Is Now Used By My Better Half As A Jewellery Box. I Printed This Box Using Black Pla Filament From Http://Www.3Dexfilament.Co.Uk And Used A Layer Height Of 0.2Mm And An Infill Of 15% But Infill Is Not Much Of A Problem So You Could Go To 10%. The Lid Is A Fraction Narrower Than The Box So That It Easily Slides In And Out (I Found With Most Other Boxes On Here That The Lid Was Too Tight Fitting). I Used A Nozzle Temperature Of 200 Degrees And A Bed Temperature Of 70 Degrees. Does Not Need Any Supports. Please Let Me Know How You Get On With Printing This. All Feedback Is Welcome!
Statistics
Likes
151
Downloads
0