Truss System
Description
Modular Truss-Beams Actually It´S Only A Test-Thing For Getting Some Inspiration And Physical Response. An Assembled Beam Weights Around 380G/M (Rods + Pla). Element-Size: 50X50X50 1X Truss-Element = 10G 1X M3 Threaded Rod = 42G/M 1X Washer+Nut = 1,5G M_B = (4 X 42G/M) + (20/M X 10G) + (8/M X 1,5G) M_B = 168G/M + 200G + 12G/M M_B = 380G/M - Put 4 Threaded Rods (M3) Through The Holes Along The Edges - Take Some Washers And Nuts And Tighten These Evenly The Beam Has A Relative High Mechanical Load Capacity, Although I Didn'T Tried To Breakdown It. The Shown Two Side Pivoted Beam On The Photo Shows A Load Of 10Kg (Also Tried 15Kg) In The Middle Of A 0,85M Long Element-Bond. However, The Deformation Is Small. For Make It Even Lighter, You Should Try To Get The Tensile Loads In It With Nylon Filament Or Something Like That.
Statistics
Likes
15
Downloads
0