Rigid Universal Filament Spool Roller Stand (RUFSRS)

Description

I Have Looked At Many Spool Holder Systems And Liked None Of Them So I Designed My Own. This Spool Holder Is Fully Universal And Pretty Damn Rigid. Walls Are All At Least 5Mm Thick,708 Bearings Are Held On By M8X30Mm Bolts But M8X20Mm Should Do. The Bearings Have An Idler/Caster That Is A Rounded V Shaped Which Allows The Spool To Self Center. This Also Allows The Base To Be Free Standing (Ie You Dont Have To Bolt It Down) If You Prefer To Bolt Everything Down Each Foot Has 4 M3 Mounting Holes And The Feet Can Be Glued To The Frame If So Desired. Vitamins: 4X M8X20Mm Bolts (Min Length That Will Work) 4X M8 Nuts 4X 708 Bearings Extra Things: Superglue 16X M3 Nuts And Bolts Use These If You Want To Mount It And Make It Very Sturdy, Mine Is Freestanding And Works Fine. Feet Can Be Super Glued To The Frame For Extra Strength Proteins 4X 708Spoolrollerfeet.Stl 2X 708Spoolrollerframe.Stl 4X 708Spoolrollerscidler.Stl (These Go Over The 708 Bearings) Dual / Triple / Quad / Pent / Hex.... Spool Design Coming Soon.

Statistics

Category

Tags