Diatone #37 250mm mods
Description
This Are My Mod To Improve The Quality Of The Frame Diatone #37. In This Mode There Are: -Arm Spacer, There Are 2 Different Arm Spacer, With This Spacer You Can Put The Esc Between The Two Plates And You Can Choose 7Mm Or 5Mm, Due To Different Esc Height. So, Please Before You Start Printing Arm Spacer Measure Height Of The Esc. You Need A Different Screw, With 7Mm Spacer And Leg You Need 20Mm Screw. -Xt60 Holder That Improve The Clean Of The Plate. -Legs, I Like See The Quad Close To Ground (11Mm From The Ground) And When It Flies The Small Legs Make An Aggressive Profile. :D At Least There Is A Plate That Make Me Crazy In Drawing. Removed Because Wrong Hole. //-Center Plate, There Are Two Version. One Is Only For Make A Replacement, It Is Reinforced Because Is About 2,25Mm Of Thickness. One Other Is Designed To Include The Cc3D Esc'S Pins, It Has Integrated Spacer So You Can Flip The Cc3D And There Is Enought Space To Place The Connector Of Esc. You Can Have A Clean Plate Because There Aren'T Cable, But There Is A Problem, The Fpv Camera Must Be Thin, And With No Spacers. I Not Use This Configuration Because I Think That The Camera Need To Be Protected. So Why Do Not You Could Do A Protection? Yes, The Next Thing Is A Protection :P \\ Stay Tuned. Sorry For My Bad English :/ ------------------Work In Progress-------------------- Feel Free To Contact Me At: Romeovirgilio@Gmail.Com
Statistics
Likes
3
Downloads
0