ZMR250 Lite 12mm Spacer Set
Description
My Version Of A Slim Zmr250, If You Have Any Questions Please Ask. Will Need: - 16X M3X20Mm Hex Bolts - Ws2812 Led Strip - Diode 1N4004 Or Similar Don'T Have Access To A 3D Printer? I Sell Kits On Ebay :) Http://Www.Ebay.Com.Au/Itm/322045639783 If Your Ws2812 Led Strip Doesn'T Work Properly Then You May Need A Diode To Drop The Voltage Slightly. From The Cleanflight Manual: "If You Have Leds That Are Intermittent, Flicker Or Show The Wrong Colors Then Drop The Vin To Less Than 4.7V, E.G. By Using An Inline Diode On The Vin To The Led Strip. The Problem Occurs Because Of The Difference In Voltage Between The Data Signal And The Power Signal. Some Leds Are More Tolerant Of This Than Others." *Ignore The Arm Spacers In The First Picture, Had To Change The Design As I Bought Esc'S With External Capacitors By Mistake. The Published Design Is For Use With Esc'S With On Board Capacitors, Afro And Kiss Esc'S For Example.
Statistics
Likes
44
Downloads
0