Stratux Nano Single band
Description
Edit: This Case Has Been Superseded By The Squared Off Slim Case, I Highly Recommend It Over This Older Design. Updated April 17 By Request I Have Made A Few Changes To Fit Dan Murrays High Gain Antennas. The Overall Length Will Also Now Accommodate A Vk-172. Look For The Files Marked New. Single Band Version Of My Notched Case For The New Nano Rtl-Sdr. This Will Actually Hold Two Nano Sdr'S The Only Difference Between It And The Dual Models Is That They Have To Be Thicker To Provide Clearance For The Larger Gps. Reduced Thickness And Added Many More Vents For Passive Ventilation. Still Has Provisions For A Gps But It Need To Be A Smaller 30.5X30.5Mm Footprint. These Are Very Common In The Multirotor World. Available As A Notched Or End Sma Mount Antenna And With Or Without 6.4Mm (1/4") Suction Cup Holes. I Got Some Suction Cups With Metal Hooks At A Local Hardware Store. They Just Need To Have A Mushroom Head On The Back With The Thin Part Being 1/4". I Use M3 Cap Head Screws But #4 Screws Would Work Just Fine. Start By Drilling Them Top Case Holes To Allow The Hardware To Slide In And Then Gently Screw The Screws Into The Base. Https://Www.Shapeways.Com/Shops/Rtd If You Like This Design And Want To Thank Me My Paypal Address Is Helno@Rocketmail.Com I Can Also Do Any Customization.
Statistics
Likes
3
Downloads
0