Inductive proximity z-probe adapter. Works with glass cover.
Description
Note: This Adapter Will Work For Detachable Probes Only Or As Temporary Attachment For Calibration. You Can'T Just Add This Adapter To Permanently Mounted Probe That Only 2-3 Mm Higher Than Nozzle. My Aluminum Kossel Bed Is Not So Flat, So I Covered It With 3Mm Glass. Much Better, But Inductive Probe Stopped Working. Here Is The Adapter I Made. You Will Need A #14 0.08" (2Mm) Nail And Very Light Spring (I Used One From This Kit Http://Www.Homedepot.Com/P/Everbilt-Spring-Assortment-Kit-84-Pack-15642/202045461). Actually, It Works Even Without Spring Because Of The Weight Of Nail/Tip. You Can Replace The Spring With Thin U-Shaped Piece Of Plastic (Pet Bottle, Etc). This Modification Doesn'T Affect The Sensitivity And Precision. Don'T Forget To Adjust The Z-Probe Height In Firmware. I Had To Make One More :) How It Works: Https://Www.Youtube.Com/Watch?V=83Hy3M8Qltg Animated Probe Video: Https://Www.Youtube.Com/Watch?V=C8Dt_2Mzwxk Printed With Pla 180C, 044Mm Nozzle - 0.2Mm Height - 0.5Mm Manually Set Width - 30 Mm/S With Slicer Cooling Enabled - Better To Print Together For Optimal Cooling
Statistics
Likes
272
Downloads
0