intensewalkera Omnimac Vibration dampening isolator mould - cast - template
Description
Revised To V1.3- Drip Tray Added To Help Prevent Leakage. Bolting Arrangement Amended. Walls Made Thinner. Revised Up To V1.2- Gave It A Tidy Up As Regards Reducing Its Boundary Size, Initially I Just Revised One Of My Larger Sized Templates. Added A Recess In Each End To Allow A Screw Driver To Be Used To Prise The Templates Apart. Rounded The Corners To Aid In It Sticking To The Build Bed. Http://Youtu.Be/Oak46Bk0Zey This Was A Request Based On A Previous Model, To Suit The Omnimac Dampener M3 9Mm X 13Mm Long. I Have Not Used The Cast Myself, So Any Feedback Is Appreciated. I Think The Flanges Could Be Too Small. This Is Based On The Vibration Dampening Balls I Already Use , Used On Multicopters To Isolate Vibrations To The Gopro Camera Range (Will Work With Others). Its A Rough Design, I Will Comeback And Tidy Up The Design Of This, Once I Get Chance.I Would Like To Have It Hinged And A Few Other Minor Tweaks To Make Pouring The Silicone In To The Mould Easier Bolt The Two Parts Together With M3 Bolts, Don`T Over Tighten. Mix Up Your Silicone And Catalyst And Pour. I Used 30G Of Rtv 2020 Silcone/Catalyst As A Guide Of Quantity Checkout How To Make The Rtv Silicone Mix On Google Etc, There Is Plenty Of Info On There, You Can See From My Attempt, That I Had Too Much Air Get In, This Was Totally My Fault Due To It Being My First Time Using This Silicone Mixing. I Know My Next Attempt Will Be Far Better, Now I Know What I Am Doing! I Used Medium Hardness Silicone As A Guess, I Have Not Tested It In Anger Yet But I Will Get Round To It Shortly.
Statistics
Likes
16
Downloads
0