Balance Board
Description
Creates A Rounded Half-Sphere With Mounting Holes That Can Be Screwed To A Board To Create A Balance Board. There Were Other Similar Models On Thingiverse When I Made This, Most Notably [Ankle Board](Http://Www.Thingiverse.Com/Thing:28251), But I Didn'T Like Having The Screw In The Top, Since This Is The Primary Balance Surface. I Also Wanted To Be Able To Scrunch The Rounded Shape, Since [Some Highly Regarded Brands](Http://Www.Thesurfzone.Net/Store/Product/Cat_0/Id_40/) Count Their Flatter Dome Shape As A Market Advantage, And It Supposedly Makes A Pleasant Experience. With This, You Can Customize All Your Screw Dimensions, The Screw Count, The Total Size, And The Height Of The Dome. I Recommend Planning Out Your Board First, So You Can Print A Dome To Fit Your Needs! Also Supports Wood Screws With Tapered Heads, And Allows Them To Neatly Sit In The Mount Plate! I'Ve Provided 3 Different Models, Both With And Without Support Trees That I Generated In Meshmixer. The Print Times Were As Follows: - 4Cm: 40Min Print Time. - 8Cm: 3Hr Print Time. - 15Cm: 11Hr Print Time. ## Some Easy Instructions: - Print The 15Cm "With Support" Model. You Do Not Need To Add Support To Your Slicer, The Model Contains Minimal Support "Trees" That Should Work Fine. - (5) Everbilt Flat Head Phillips Wood Screws #8 X 3/4In, As Pictured. - (1) 1X12" Pine Board, Cut To A Shape You Enjoy Standing On.
Statistics
Likes
50
Downloads
0