Raspberry Pi 2 lulzbot mini mounted case
Description
Designed To Print Flat And Snap Together With Dovetails. Some Fiddling With A Sharp Blade On The Dovetails May Be Required. The Case Should Be Mounted On The Lulzbot Mini Towards The Front Of The Machines With The Network Port Facing The Back. The Holes Should Line Up Exactly With The Front Set Of Holes, And If Tapped With M3X0.5 Threads, It Will Allow You To Screw It To The Frame With The Exact Same M3X6 Machine Screws That Mount The Grip To The Top Of The Printer. The Previous Designs Leading To The Final Design Are Pictured In The Last Photo. This Was Laid Out For A Single Print Of All Parts In Tinkercad. Edit It Online Https://Www.Tinkercad.Com/Things/Ai3Il1Utaub This Was Designed In 123D Design. Find It Here: Http://Www.123Dapp.Com/123D_Design/Raspberry-Pi-2-Dovetail-Box-Lulzbot-Mini-Mount-/4922245#
Statistics
Likes
21
Downloads
0