Robox Spiral Printable Double wall Insulated Cup
Description
This Is A Supercool Espresso Cup That Can Be Spiral Printed. The Inside And Outside Form A Single Continuous Profile That With Some Tweaking Can Be Spiral Printed. I Set Robox To Print A 1Mm Wall Section Using The 0.8Mm Nozzles, 0.2Mm Layers And 6 Bottom Layers To Make A Solid Base. The Outer Profile Has Dips In It To Touch The Cup Surface To Support It, I’Ve Had Boiling Water In My Print But Do This At Your Own Risk!
Statistics
Likes
52
Downloads
0