10mL B-D Syringe Handle
Description
Edit - After Some Use The Grooves In The Body Handle Pinched My Fingers. I Added 'Body Handle V2' Without The Grooves. I Would Recommend Using V2. Handle For 10Ml B-D Syringe. I Needed To Dispense Solder Paste On A Bunch Of Boards With A Qfp-64, No Time To Wait For Stencil. The Small Nozzle Requred Made It Difficult To Squeeze The Syringe. Marking On Plunger: C-199 Diameter Of Syringe Body: 0.64" Support Is Required For The Plunger Handle. The Flange On The Top Of The Plunger Should Be A Tight Fit With The Slot On The Handle, Once You Press It Through The Slot It Should Snap In And Be Free To Rotate. I Printed With: .3Mm Layers 1.5Mm Walls 1.0Mm Top And Bottom 25% Infill Line Support Touching Buildplate 15% Fill Cura Solid Files Are Included In .Zip Folder.
Statistics
Likes
143
Downloads
0