Sintron Delta Kossel Hot-end Fan-mount (30mm)

Description

The Built-In Fan-Mount On The Sintron Kossel End-Effector Design Was Not That Good. It Was Coming In The Way Of The Diagonal Rod-Ends. Also, The Draft From The Fan Was Going All Over The Place, And Cooling Things That Were Not Supposed To Be Cooled. However, This Design Turns Out To Be Much Better, As It Mounts Directly On The Hot-End Heat-Sink. I Was Able To Customize It, For A 30Mm Fan, And A Heat-Sink Barrel Diameter Of 19.5Mm (Which Is Much Smaller Than The Original E3D V6 Hot-End, As This Is A Clone). This Design Cools The Hot-End Heat-Sink Barrel Much More Effectively, So The Nozzle Heats Up Faster, And The Prints Seem To Come Out So Much Better. Also, Since There Are No Gaps On The Top Or Bottom Of The Fan-Mount, All Of The Air Is Completely Forced Directed Only Towards The Heat-Sink, Which Is Awesome. Customized Version Of Http://Www.Thingiverse.Com/Thing:988310 Created With Customizer! Http://Www.Thingiverse.Com/Apps/Customizer/Run?Thing_Id=988310

Statistics

Category

Tags