Star Wars X-Wing miniatures game maneuver disk/dial replacement rivets
Description
These Were Modeled In Ac3D And Fit Fine When Printed With My Ctc Printer. It'S Best To Print The Female Part First, Check It Fits A Disk, Then Print A Male Part. If A Part Doesn'T Fit Tightly, Scale It Up Or Down E.G. By 101% Or 99% And Try Again. Mine Fit Together Well And Can Be Pulled Apart If Wiggled From Side To Side. Mine Were Printed In Pla At 0.1Mm Using A Raft. The Ends Were Finished With Fine Wet/Dry Sandpaper.
Statistics
Likes
139
Downloads
0