Skil tripod quick release camera mounting plate with 35mm square
Description
__Update On 23Rd March 2020 :__ First Thing First : If You Want To Print The Big One, Consider Using The [Enhanced Design](Https://Www.Thingiverse.Com/Thing:4237371) I Publish Today ! (Parts Aren'T Compatible) __Original Text :__ Most Tripods Come With Only One Mounting Plate. When I See The [Quick Release Camera Mount For Ambico/Velbon Tripod](Http://Www.Thingiverse.Com/Thing:151964) I Found The Idea Good So I Reuse My [Sigma Em-140 Ring Flash Holder](Http://Www.Thingiverse.Com/Thing:1116966)'S Camera Holding Part And Add A Foot That Fit In The Tripod. Two Versions For This Object : The Small One Is Well Fitted For Small Devices Like Flash And The Big One For Greater Devices Like Camera. Need Part (See Picture : Big Version On The Left, Small In The Centre And The Original Plate One The Right): * Screw "Photo Format" (1/4 Inch Large × 1/2 Inch Length): 1 * Screw M3 Cylindrical Head (16Mm For Small Version, 12Mm For Big One): 4 * Nut M3: 4 * Rubber Washer Seal (15×21 For Small Version,20×27 For The Big One): 1 __Update On 10Th March 2016 :__ An Elongated Version Of The Big One Is Added. It Offset The Camera Of 64Mm. Making This Version Require A New Pair Of M3 Bolts. __Update On 23Rd March 2020 :__ Added An New, Thinner With Hidden Nuts Version Of The Base : Big-Base-Thin.Stl If Someone Want To Update Its Print. New Enhanced Design Will Follow.
Statistics
Likes
32
Downloads
0