MN21 MN27 Battery Holder
Description
This Is A Remix Of The Battery Holder By Enif. As I Did Not Find A Suitable Case For My 12V Mn21 I Resized The Aaa One. It Can Be Printed On Abs (Maybe Better For Elasticity) Or Pla . I Used Pla . The First Attempt The Print Resulted A Bit Small So I Modified The Stl File . In Case You Print With Pla And Your Case Results Too Small, Simply Let The Top Part Of It (Spring) Into Acetone (Use Proper Protection !!) For 1 Min, It Will Add Flexibility To It ! In Case The Battery Remains Loosen Then Increase The Diameter Of Electrical Wire Used To Connect It On Both Side.
Statistics
Likes
9
Downloads
0