Bed Level for MostlyPrintedCNC
Description
Whilst Designing My Own Cnc From Scratch After Being Hooked By The Mostly Printed Cnc I Decided One Thing I Had To Have Was A Method To Fine Adjust The Bed Work Area Other Than The Legs. As Can Be Seen From The Photo I Have Used 40Mm M8 And Plenty Of Adjustment Available Board Pictured Is 18Mm Mdf. So Here Is My Simple Solution The Bed Can Be Adusted At 4 Corners And If Necessary Middles Too By Use Of Top And Bottom M8 Nut And Bolt. Simple But Effective I Will Be Combining And Incorporating Into The Feet Of My Mp_Cnc In The Future When Time Allows And Will Upload That Version When Done.
Statistics
Likes
17
Downloads
0