Versacopter Skirts MAX Version 2
Description
The Original Idea With These Skirts Was To Create A Design For An Ap Setup On The Versacopter That Would Allow Longer Booms For Bigger Motors And Props To Lift A Gimbal. With Version 2 Of These Skirts I Wanted To Maximize Internal Space. In An Effort To Make As Much Room As Possible Inside The Versacopter, I Took My Original Versacopter Max Skirts Which Are 28Mm Tall And Made Them 43Mm Tall. I Have Also Squared Off The Arm Clamps Which Add 17Mm In Internal Length. I Didn'T Want To Do Much With The Sides But When Dealing With A Small Space Every Millimeter Counts So I Reduce Them From 5Mm Wide Down To 4Mm Wide Which Gives An Extra 2Mm Of Width. With This Setup It Is Possible To Install A Vector Flight Controller Inside The Versacopter With Room To Spare. Due To How Tall These Skirts Are You Will Need 50Mm M3 Screws For Assembly. Please Visit Http://Rcpartshangar.Com Where I Offer Most Of My Designs For Purchase.
Statistics
Likes
5
Downloads
0